Description
The super yagi for the 13 cm-band with fore-mast mounting. Thus, mounting anywhere on a mast (and not necessarily on top of the mast) is possible. The mechanical set-up becomes quite simple. By utilizing high quality/low loss coaxial cable and the shortest possible feedline the lower gain of the 13cm-super yagi can be compensated in many cases.
The antennas have an very high f/b ratio because of the use of 8 reflectors. This is in particular important for high-gain yagis: even the highest gain gets useless if unwanted signals or interferences are being received from the back side of the antenna. EME or SAT freaks enjoy our antennas due to the low backward noise scatter (from the surface of the earth). All nuts, bolts and washers are manufactured of stainless steel. For those antennas with support strut also the mast clamp itself is made of stainless steel (where else do you find this?).
The antennas are delivered pre-mounted with all elements already in place. They can be assembled in about 10 minutes; you don’t have to read the manual (which is provided of course…) and it does not take an engineering approach to install the antenna and get into the air…
The antennas are delivered pre-mounted with all elements already in place. They can be assembled in about 10 minutes; you don’t have to read the manual (which is provided of course…) and it does not take an engineering approach to install the antenna and get into the air…