Description
Utilising a pair of FU-728F ceramic tetrode the OM2000A is designed for high power continuous duty.
Specification of OM4001A:
| Frequency coverage: | Amateur Bands 1.8 – 29.7 MHz including WARC |
| Power output: | 4000+ W in SSB and CW on HF bands, 3000W in RTTY and DIGI modes |
| Input Power: | Usually 40 to 60W for full Output Power |
| Input Impedance: | 50 Ohm, VSWR < 1.5 : 1 |
| Power Gain: | 17 dB |
| Output Impedance: | 50 Ohm unbalanced |
| Maximum Output SWR: | 3:1 |
| SWR protection: | Automatic switching to STBY, when reflected power is 350W or higher |
| Intermodulation distortion: | -32dB below nominal output |
| Suppression of harmonics: | < -50 dBc |
| Tubes: | 2x FU728F Ceramic tetrode |
| Cooler: | Centrifugal blower + Axial blower |
| Response speed of AUTO tune: | less than 0,5s within same BAND, less than 2s if out of BAND |
| Power supply: | switchable voltages – 220/230/240V for 50Hz or 230/240/250V for 60Hz (or other primary voltages e.g. 200V 50/60Hz for Japan) |
| Transformers: | 2 pcs of toroidal transformer 3kVA |
| Dimensions: | 485 x 200 x 455mm (width x height x depth) |
| Weight: | 46 kg |
| Protection circuits: | – VSWR too high |
| – Anode current too high | |
| – Anode voltage error | |
| – Screen current too high | |
| – Screen voltage error | |
| – Grid current too high | |
| – Grid voltage error | |
| – Heating voltage error | |
| – Mistuning of PA | |
| – Temperature too high | |
| – Soft start for protecting your fuses | |
| – “switch-on blocking“ at opened amplifier | |
| Indications: | 4.3″ color touch screen display |
| Features: | High level of protection |
| Memory for faults and warnings, easy maintenance | |
| Automatic set-up anode current (BIAS) – no need to adjust manually after changing the tubes | |
| Three programmable working modes of the axial blower | |
| Full QSK operation | |
| Many operational parameters to display | |
| The smallest and lightest 4000 W Power Amplifier on the market |
Download the manual HERE